Short answer: Crocodile clip test leads suit a multimeter when a held connection is safer and more repeatable than balancing a pointed probe, provided the clip is designed for the circuit and cannot bridge adjacent parts. Leadbrand documents a GS1023 probe-and-clip kit with a 4 mm banana format and selected material information. It does not state clip sizes, lead length, insulation coverage, voltage or measurement category. Confirm the kit contents and compare the complete accessory with the meter manual before treating the 4 mm description as compatibility.
Choose the contact end before the plug end
Start at the workpiece. A broad jaw may hold a substantial lug but be unsuitable near small terminals. A smaller clip may improve access but still need adequate insulation and a secure grip.
The product page does not give jaw opening, exposed-metal length or clip count. Those unknowns should be resolved from supplied documentation or seller confirmation.
| Decision point | What to verify | Listing status |
|---|---|---|
| Jaw size | Fits one contact without bridging | Not specified |
| Insulation | Coverage suitable for the task | Not specified |
| Meter connector | Full 4 mm plug and socket fit | Format only documented |
| Electrical rating | Matches the intended circuit | Not specified |
Check the complete measuring arrangement
Read the meter manual for approved connector style and ratings. The instrument, lead and clip form one measuring arrangement, and the lowest-rated or least-protected component sets the practical boundary.
HSE GS38 advises using suitable probes and leads and keeping exposed conductive parts to a minimum. If the clip has no legible rating or exposes too much metal, do not use it for a hazardous circuit.
- Define the circuit and whether it can be tested de-energised.
- Measure the contact spacing and required jaw opening.
- Confirm the clip is included in the GS1023 configuration.
- Compare connector construction and ratings with the meter manual.
- Inspect the assembly before every use.
Use clips for stability, not access by force
A clip should attach without levering, scraping insulation or distorting a terminal. If access is too tight, use a purpose-designed finer accessory rather than forcing a crocodile jaw into the space.
Keep the lead supported so its weight does not pull the clip free. Remove the assembly before changing the circuit state unless the approved procedure says otherwise.
Limits before purchase
The manufacturer does not specify clip dimensions, quantity, insulation design, lead length, resistance, current, voltage, measurement category, fuse protection or named-meter compatibility.
The GS1023 listing is suitable for consideration only after the actual clip contents and marked limits are documented for your task.
Related guides and product details
Match the clip to the contact and the complete lead assembly to the meter and circuit before buying. Read MFT Crocodile Clips for an Earth Bar: Safety Checks for related guidance. Read Multimeter Lead Kit with Clips and Hooks: What to Check for related guidance. Review the documented specification on the Multimeter test lead kit product page before ordering.
Sources and safety context
- Supports the listed configuration, materials and 4 mm format. Current Leadbrand product page.
- Supports appropriate ratings, insulation and minimal exposed conductive parts. HSE GS38: Electrical test equipment for use on low voltage electrical systems.